Jump to letter: [
ABCDEFGHIJKLMNOPRSTUVWXYZ
]
wanpipe16 - Sangoma WANPIPE package for Linux.
It contains the WANPIPE kernel drivers and configuration/startup/debugging
utilities for Linux. Linux Drivers for Sangoma AFT Series of cards and S Series
of Cards.
Packages
Latest: wanpipe16-3.5.24.9-42.el6.fio.src.rpm
| Name |
Epoch |
Version |
Release |
Arch |
Size |
Built |
| wanpipe16 |
0 |
3.5.24.9 |
42.el6.fio |
src |
11.8 MiB |
2012-03-15 14:37:42 |
| wanpipe16 |
0 |
3.5.24.9 |
41.el6.fio |
src |
11.8 MiB |
2012-02-17 12:22:12 |
| wanpipe16 |
0 |
3.5.24.9 |
40.el6.fio |
src |
11.8 MiB |
2012-02-07 07:34:28 |
| wanpipe16 |
0 |
3.5.24 |
39.el6.fio |
src |
11.6 MiB |
2012-01-21 03:22:26 |
| wanpipe16 |
0 |
3.5.24 |
38.el6.fio |
src |
11.6 MiB |
2011-12-18 18:22:55 |
| wanpipe16 |
0 |
3.5.24 |
37.el6.fio |
src |
11.6 MiB |
2011-11-28 02:39:33 |
| wanpipe16 |
0 |
3.5.20.8 |
36.el6.fio |
src |
14.0 MiB |
2011-07-17 04:52:34 |
Changelog:
- * 2011-04-27 - Lott Caskey <lottc[AT]fugitol[DOTCOM]> - 3.5.20-34
- Upgraded to 3.5.20.
- * 2011-01-19 - Lott Caskey <lottc[AT]fugitol[DOTCOM]> - 3.5.18.13-32
- Added posttrans so that wanrouter is not removed from init.d
- * 2011-01-19 - Lott Caskey <lottc[AT]fugitol[DOTCOM]> - 3.5.18.13-31
- Update to version 3.5.18.13.
- Change init.d kill prioity to 70 in /usr/sbin/wanrouter and
/etc/init.d/wanrouter. This prevents the system from hanging when
it attempts to shutdown Wanrouter prior to Asterisk.
- * 2011-01-07 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.18.13
==================================================================
- Fixed scripts for Ubuntu
- TDM API updated Tone Event API to include tone type
DTMF, FAX_1100, FAX_2100, FAX_2100_WSPR
- Fixes for latest 2.6.36 linux kernel
- Fixes for TTY Driver for 2.6.32 linux kernel
- BRI default idle set to 0xFF so it does not interfere
with multi-port mode.
- BRI NT activation/deactivation logic update.
- * 2010-11-22 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.18
==================================================================
- BRI Multi-Point fix idle 0xFF
- BRI fix for XEN virtualization
- Fixed front end interrupt issue
- wancfg_fs (fix the little bugs)
- update to support the latest dahdi-linux
- fix dahdi_scan, now reporting the right values instead of showing blank
- new echo canceler image
- fix for the echo canceler for A500 for freetdm mode.
HWEC will turn on when there is a call on the bri line.
- Added SW HDLC into the core. B
- B601 is now supported on FreeTDM/FreeSWITCH and TMDAPI
- Added wan_fxotune utility to utils directory
Used to tune fxo cards under TDM API or FreeSWITCH mode.
- * 2010-10-08 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.17
===================================================================
- Critical Bug fix in WAN mode. Bug introduced in 3.5.16
- * 2010-09-27 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.16
===================================================================
- Dahdi 2.4 Support
- Fixed BRI B500/B700 hwec enable on call start caused in 3.5.12 release.
- Bug fix in voice+data mixed mode where dchan could get stuck due to
dma overruns.
- Bug fix in tdmapi where excessive memory was allocated on pre-allocation buffers.
- Bug fix tdmapi defaults to 20ms chunk size instead of 10ms
- Bug fix broken support for A101/2 legacy EOL cards.
- New XEN Support
TDM Voice will now work properly on xen virtualized machines
- Fix for 64bit 8gig issues
- New rpmbuld spec files.
rpmbuild -tb wanpipe-3.5.16.tgz
rpmbuild -tb wanpipe-3.5.16.tgz --define 'with_dahdi 1' --define 'dahdi_dir /usr/src/dahdi'
- * 2010-08-27 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.15
===================================================================
- Fixed B600 and B601 warning messages introduced in 3.5.14
- New Firmware for A108&A104 V43
Fixes PCI parity errors on new dell,ibm boxes
- Libsangoma added rw fe reg, and rx/tx gains
- Build script does not polute the linux source any more.
- Bug fix in B800 detect code
- Fixed wanfcg_fs for freeswitch
-
- * 2010-06-29 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.14
===================================================================
- Fixes stop script for Asterisk 1.6.2
- Compile fix in legacy api sample code
- Skipped .13 releaes went straight to 14 :)
- * 2010-06-28 - Nenad Corbic <ncorbic[AT]sangoma[DOTCOM]> - 3.5.12
===================================================================
- Fixed Dahdi 2.3 Support
- Fixed FreeSwitch Openzap HardHDLC option for AFT cards
- Fixed wanpipemon support for non aft cards.
- Merged USB FXO code from 3.6 release
- USB FXO bug fix for 2.6.32 kernels
- Support for B800 Analog card
- Fixed alarm reporting in DAHDI/ZAPTEL
- Added Extra EC DSP Configuration Options
HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation enabled with nlp (default)
HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)
HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax
HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation
HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)
HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20 default)
HWEC_RX_AUTO_GAIN = 0 # 0: disable -40-0: default rx audio level to be maintained (-20 default)
HWEC_TX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
HWEC_RX_GAIN = 0 # 0: disable -24-24: db values to be applied to tx signal
- Added AIS BLUE Alarm Maintenance Startup option
Allows a port to be started in BLUE alarm.
TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down
- Fixed Legacy XDLC compile
- Fixed core edge case scenarios where
potential race condition could occour.