==================================================================

- BRI Multi-Point fix idle 0xFF
- BRI fix for XEN virtualization
- Fixed front end interrupt issue
- wancfg_fs (fix the little bugs)
- update to support the latest dahdi-linux
- fix dahdi_scan, now reporting the right values instead of showing blank
- new echo canceler image
- fix for the echo canceler for A500 for freetdm mode.
  HWEC will turn on when there is a call on the bri line.
- Added SW HDLC into the core. B
- B601 is now supported on FreeTDM/FreeSWITCH and TMDAPI
- Added wan_fxotune utility to utils directory
  Used to tune fxo cards under TDM API or FreeSWITCH mode.

===================================================================

- Critical Bug fix in WAN mode.  Bug introduced in 3.5.16

===================================================================

- Dahdi 2.4 Support
- Fixed BRI B500/B700 hwec enable on call start caused in 3.5.12 release.
- Bug fix in voice+data mixed mode where dchan could get stuck due to
  dma overruns.
- Bug fix in tdmapi where excessive memory was allocated on pre-allocation buffers.
- Bug fix tdmapi defaults to 20ms chunk size instead of 10ms
- Bug fix broken support for A101/2 legacy EOL cards. 
- New XEN Support 
  TDM Voice will now work properly on xen virtualized machines
- Fix for 64bit 8gig issues
- New rpmbuld spec files.
  rpmbuild -tb wanpipe-3.5.16.tgz
  rpmbuild -tb wanpipe-3.5.16.tgz --define 'with_dahdi 1' --define 'dahdi_dir /usr/src/dahdi'

===================================================================

- Fixed B600 and B601 warning messages introduced in 3.5.14
- New Firmware for A108&A104 V43
  Fixes PCI parity errors on new dell,ibm boxes
- Libsangoma added rw fe reg, and rx/tx gains
- Build script does not polute the linux source any more.
- Bug fix in B800 detect code
- Fixed wanfcg_fs for freeswitch 
-

===================================================================

- Fixes stop script for Asterisk 1.6.2
- Compile fix in legacy api sample code
- Skipped .13 releaes went straight to 14 :)

===================================================================

- Fixed Dahdi 2.3 Support
- Fixed FreeSwitch Openzap HardHDLC option for AFT cards
- Fixed wanpipemon support for non aft cards.
- Merged USB FXO code from 3.6 release
- USB FXO bug fix for 2.6.32 kernels
- Support for B800 Analog card
- Fixed alarm reporting in DAHDI/ZAPTEL

- Added Extra EC DSP Configuration Options
  HWEC_OPERATION_MODE	= OCT_NORMAL 	# OCT_NORMAL: echo cancelation enabled with nlp (default)  
																				  HWEC_DTMF_REMOVAL		= NO          	# NO: default  YES: remove dtmf out of incoming media (must have hwdtmf enabled)
  HWEC_NOISE_REDUCTION	= NO 			# NO: default  YES: reduces noise on the line - could break fax
  HWEC_ACUSTIC_ECHO		= NO			# NO: default  YES: enables acustic echo cancelation
  HWEC_NLP_DISABLE		= NO			# NO: default  YES: guarantees software tone detection (possible echo)   
  HWEC_TX_AUTO_GAIN		= 0    			# 0: disable   -40-0: default tx audio level to be maintained (-20 default)
  HWEC_RX_AUTO_GAIN		= 0				# 0: disable   -40-0: default rx audio level to be maintained (-20 default)
  HWEC_TX_GAIN			= 0				# 0: disable   -24-24: db values to be applied to tx signal
  HWEC_RX_GAIN			= 0				# 0: disable   -24-24: db values to be applied to tx signal  

- Added AIS BLUE Alarm Maintenance Startup option
  Allows a port to be started in BLUE alarm.

  TE_AIS_MAINTENANCE = NO         	#NO: defualt  YES: Start port in AIS Blue Alarm and keep line down
																		  
- Fixed Legacy XDLC compile	
- Fixed core edge case scenarios where
  potential race condition could occour.

===================================================================

- Fix for 2.6.31 and higher kernels
- TDM API Analog rx gain feature
- Disabled default NOISE REDUCTION feature in hwec
  that was enabled in 3.5.9 release. 
- Updates to T1/E1 Loopback and BERT Test

===================================================================

- Release cleanup script earsed libsangoma.c during release packaging.
  I have update release procedure so this does not happen again.
  This release has no functionl differences aside from the missing
  file from 3.5.9 release.

===================================================================

- New logger dev feature
- Bug fix in tx fifo handler
- Dahdi 2.2 broke wanpipe rbs support.
- Fixed free run interrupt supported on V38 (A108)
- Fixed RBS signalling for E1 channel 31
- Added Front end Reset Detection
  -> Support for new A108 Firmware V40
- Fixed RTP TAP bug: Caused high system load on RTP TAP usage.
- Added excessive fifo error sanity check. Fixes random pci dma errors.
- HWEC: Increased EC VQE Delay: Fixes random fax failure due to hwec.
- HWEC: Check state before bypass enable.
- HWEC: Disable bypass on release
- HWEC: Enabled Noise Reduction by default
- HWEC: Enabled Auto Gain Control by default
- HWEC: To disable Noise Reduction and Gain control set
        -> HWEC_NOISE_REDUCTION_DISABLE=NO in [wanpipe] section of wanpipe1.conf
		To check if Noise Reduction or Gain control are set
		-> wan_ec_client wanpipe1 stats 1

===================================================================

- Bug fix in sangoma_prid PRI stack for FreeSwitch & Asterisk.
  There was a slow memory leak.